Baumer N 208 사용 설명서 - 페이지 28

{카테고리_이름} Baumer N 208에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer N 208 36 페이지. Totalizer

N 208

Operating mode In the operating mode, it is possible to read

To read off ➜ Read off the display.

To reset ➜ Press the

Programming mode Operating parameters are set in the

Activating ➜ Press the

programming

4 Operating mode

The operation and use are described in this

section.

● As soon as the voltage supply has been

switched on, the counter is automatically

ready to operate.

off and reset the current counter display.

Current value display

5 Programming mode

This section describes the procedure for

programming.

programming mode.

until a broken line appears in the display.

● To transfer from the operating mode to

the programming mode:

Press the

Default settings are always printed with *.

● Programming lines are selected in suc-

cession. The input is stored when the

next programming line is called up.

www.baumer.com

button.

button for approx. 10 s

button for a minimum of 1s

button brieﬂy