Baumer TA200 사용 설명서 - 페이지 26
{카테고리_이름} Baumer TA200에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer TA200 28 페이지. Electronic tachometer
페이지 인쇄
TA200
Error messages Err 1 and Err 2 Hardware error, must be sent in for repair.
26
Technical data - trigger level
Comparator input
Inputs
Input level
Input level Low
Input level High
Input resistance
6.1 Dimensions
6.2 Default setting
The controller is supplied programmed with the following default
parameters:
Frequency of F1
Input logic
Scale F1
Display update
Time-out
Time unit F1
Decimal point F1
Program protection code no code set
6.3 Error messages
Err 6
Input frequency at tachometer F1 too high.
The error code can be cancelled by pressing the
key.
Over-range of displays F1.
999999
flashes
Can also occur at low frequencies due to unfavou-
rable parameter settings.
Example:
F1 = 100 Hz, bF1 = 0.01, unit = 1/h
100/0.01 * 3600 = 3600 000
Flashing of the numbers 999999 is automatically
cleared after correcting the para meter or raducing
the frequency.
www.baumer.com
Input circuit
PNP- / NPN-logic
Programmable
0...2 VDC
3...40 VDC
3 kΩ
40 kHz
PNP
1.0000
every 1 s
1 s
rpm
no decimal point