Baumer TA201 사용 설명서 - 페이지 27
{카테고리_이름} Baumer TA201에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer TA201 36 페이지. Electronic
페이지 인쇄Incorrect code Entering an incorrect code:
Unknown correct code If you do not know the correct code, send it back to the manufacturer.
Correct code If the code correct press the key
Key functions
For the individual programming fields the assignment of keys is the
same. There can be a difference between the key assignment used
on the operating and programming mode..
Key
Switches to the next operating parameter in the programming
mode. For fast run-through keep the key pressed down.
Key
Switches over between programming and operating mode.
Key
Selects the first or next required decade. The respective selected
decade position flashes.
Key
Deletes the display. Reset to the value zero. Reset of possible
programmed operating values.
Key
When key is pressed the respective decade position switches on
by one point until the maximum setting value is reached.
Programming fields
Programming setup and the three programming fields are now
described in order of their application.
Switching on the programming function
➜
Press the key
●
The system switches fom the operating to programming mode.
●
The
CodE display appears, this exists for programming fields 1 to 3.
➜
Enter the code via key
There is no code entered on delivery.
●
CodE
appears in the display after pressing the key
●
After
15 seconds the system switches back to the operating mode.
➜
Press the key
●
The programming fields are then accessed one after the other.
www.baumerivo.com
.
and
, than press the key
and enter the correct code.
.
TA201
.
27