Asus RT-N10E EZ N 사용자 설명서 - 페이지 17

{카테고리_이름} Asus RT-N10E EZ N에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus RT-N10E EZ N 46 페이지. 11n wireless router
Asus RT-N10E EZ N에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (22 페이지)

페이지 인쇄

Accessing the wireless router

Setting an IP address for wired or wireless clients

To access the ASUS Wireless Router, you must have the correct TCP/IP settings

on your wired or wireless clients. Ensure that the clients' IP addresses are within

the same subnet as the ASUS Wireless Router.

By default, the ASUS Wireless Router integrates the DHCP server function, which

automatically assigns IP addresses to the clients in your network.

But in some instances, you may want to manually assign static IP addresses on

some of the clients or computers in your network rather than automatically getting

IP addresses from your wireless router.

Follow the instructions below that correspond to the operating system installed on

your client or computer.

Note: In the Router mode, if you want to manually assign an IP address to your client, we

recommend that you use the following settings:

• IP address: 19.168.1.xxx (xxx can be any number between and 5. Ensure that the IP

address is not used by another device)

• Subnet Mask: 55.55.55.0 (same as the ASUS Wireless Router)

• Gateway: 19.168.1.1 (IP address of the ASUS Wireless Router)

• DNS: 19.168.1.1 (ASUS Wireless Router) or assign a known DNS server in your network

Chapter 3: Configuring the clients

Configuring the

network clients

RT-N10E