DOUK AUDIO U2 Pro 매뉴얼

{카테고리_이름} DOUK AUDIO U2 Pro에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DOUK AUDIO U2 Pro 2 페이지. Mini xmos usb to coaxial /optical converter
DOUK AUDIO U2 Pro에 대해서도 마찬가지입니다: 매뉴얼 사용 방법 (6 페이지)

페이지 인쇄

U2 / U2 Pro Mini XMOS USB to

Coaxial /Optical Converter

Thank you very much for choosing our products,

please read this manual carefully before using.

Introduction

This is a USB to Toslink optical / coaxial / 12S(U2 PRO) audio

converter, a pure digital sound card, support common losselss

playback, suitable for PC computer, notebook, mobile phone,

set-top box, rock 64, raspberry pi and so on, it can provide better

sound quality than their own sound card.

How to use

1. Connect U2/U2 PRO to the USB port of the computer with a

USB cable, and the computer USB port can be used for power

supply, for U2 pro version you also can use external DC 5V

power interface.

2. After connecting to the computer, the computer will prompt that

the USB device has been found, and then please install the

driver of this device: XMOS-Stereo-USB-Audio-Class2-Driver-

3004_v4.13.0.exe, please choose different versions of drivers

according to the computer system.

3. Click "Output" on the left side and then select

"ASIO:foo_dsd_asio"

on the right side as the following picture shows:

4. Click "Output" --- "ASIO" on the left side, and then double click

"foo_dsd_asio" just as the following picture shows：

①

③

3. After installing the driver, the computer will prompt and display

the device "XMOS XS1-U8 DJ" in the device manager.

How to play DSD music

Warm tip: 1.3.8 version FOOBAR player is recommended, the

player settings of differnt version players will be a little different.

1. Install the ASIOProxyInstall-0.7.1.2.exe program in the foobar

components file, and follow the prompts to complete.

2. Install the sacd plug-in and ASIO plug-in, as shown below:

(The plug-in is in the foobar components file )

After double click "foo_dsd_asio", the following menu will appear

and please set as it indicates，(Note: must set as the following

picture if want coaxial and optical to output DSD.)

②

④