Asus RX3041 인터넷 연결 구성 매뉴얼 - 페이지 3

{카테고리_이름} Asus RX3041에 대한 인터넷 연결 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus RX3041 11 페이지.

This document describes how to set up ASUS RX3041/SL200 for getting connection to the

Internet and provides troubleshooting tips to help you fix some simple problems.

The figure below illustrates a connection diagram example.

Chapter 2: Getting to know Internet connection

The router supports following connection types: Automatic IP, Static IP, PPPOE, PPTP, L2TP,

Bigpond

By default, the Router's Internet Connection Type is set to Dynamic IP, which should

be kept only if your ISP (Internet Service Provider) supports DHCP (Dynamic Host

Configuration Protocol) or you are connecting through a dynamic IP address.

If your ISP has assigned you a permanent, fixed (static) IP address for your

computer, select "Static IP". In this type, you should have a static IP address from

your ISP, and Subnet mask, Gateway IP address are necessary.

Most of DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to

establish Internet connections, select "PPPOE". If you are connected to the Internet

through a DSL line, check with your ISP to see if they use PPPoE. In this type, you

should have Username and Password from your ISP.

Point to Point Tunneling Protocol (PPTP) and Layer 2 Tunneling Protocol (L2TP).

PPTP is a service that usually applies to connections in some European countries

Introduction

type