Baumer HUBNER BERLIN GTF 7 설치 및 작동 지침 - 페이지 7

{카테고리_이름} Baumer HUBNER BERLIN GTF 7에 대한 설치 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer HUBNER BERLIN GTF 7 24 페이지. Tachogenerator
Baumer HUBNER BERLIN GTF 7에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (24 페이지)

페이지 인쇄

Security indications

2.1

Risk of injury due to rotating shafts

Hair and clothes may become tangled in rotating shafts.

• Before all work switch off all voltage supplies and ensure machinery is stationary.

2.2

Risk of destruction due to mechanical overload

Rigid mounting may give rise to constraining forces.

• Never restrict the freedom of movement of the device.

The mounting instructions must be followed.

• It is essential that the specified clearances and/or angles are observed.

2.3

Risk of destruction due to mechanical shock

Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the device.

• Never use force.

Mounting is simple when correct procedure is followed.

• Use suitable puller for dismounting.

2.4

Risk of destruction due to contamination

Dirt penetrating inside the device can damage the device.

• Absolute cleanliness must be maintained when carrying out any work on the device.

• Never allow lubricants to penetrate the device.

2.5

Risk of destruction due to adhesive fluids

Adhesive fluids can damage the magnets and the carbon brushes. Dismounting a device, se-

cured to a shaft by adhesive may lead to the destruction of the device.

2.6

Explosion risk

Do not use the device in areas with explosive and/or highly inflammable materials.

They may explode and/or catch fire by possible spark formation.

MB011 - 11055617

Baumer_GTF7_II_DE-EN (19A2)

Securtiy indications