Baumer Hubner Berlin TDP0,2LS-3 설치 및 운영 지침 매뉴얼 - 페이지 7
{카테고리_이름} Baumer Hubner Berlin TDP0,2LS-3에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer Hubner Berlin TDP0,2LS-3 28 페이지. Tachogenerator with integrated centrifugal switch
Baumer Hubner Berlin TDP0,2LS-3에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (32 페이지)
페이지 인쇄
2
Security indications
2.1
Risk of injury due to rotating shafts
Hair and clothes may become tangled in rotating shafts.
• Before all work switch off all operating voltages and ensure machinery is stationary.
2.2
Risk of destruction due to mechanical overload
Rigid mounting may give rise to constraining forces.
• Never restrict the freedom of movement of the tachogenerator. The installation instructions
must be followed.
• It is essential that the specified clearances and/or angles are observed.
2.3
Risk of destruction due to mechanical shock
Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the device.
• Never use force. Assembly is simple when correct procedure is followed.
• Use suitable puller for disassembly.
2.4
Risk of destruction due to contamination
Dirt penetrating inside the tachogenerator can damage the tachogenerator.
• Absolute cleanliness must be maintained when carrying out any work on the open terminal box
and while changing the carbon brushes.
• When dismantling, never allow lubricants to penetrate the tachogenerator.
2.5
Risk of destruction due to adhesive fluids
Adhesive fluids can damage the magnets and the carbon brushes. Dismounting an tacho, secured
to a shaft by adhesive may lead to the destruction of the unit.
2.6
Explosion risk
Do not use the tachogenerator in areas with explosive and/or highly inflammable materials.
They may explode and/or catch fire by possible spark formation.
MB079a - 11068397
Baumer_TDP02-TDPZ02-B3_II_DE-EN (16A2)
Security indications
2
4