Asus WL-500g 사용자 설명서 - 페이지 30

{카테고리_이름} Asus WL-500g에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus WL-500g 43 페이지. For 802.11g/b wireless clients
Asus WL-500g에 대해서도 마찬가지입니다: 사용자 설명서 (26 페이지)

페이지 인쇄

Chapter 3 - Software Configuration

Home Gateway Mode (Cont.)

transmitted data, select a middle or high Security Level.

Middle: allows only those users with the same WEP key to connect to this

access point and to transmit data using 128-bit WEP encryption.

High: allows only those users with the same WPA pre-shared key to connect

to this access point and to transmit data using TKIP encryption.

Click Finish to continue. You are prompted to save the settings. Click

Save&Restart to save the settings to the ASUS Wireless Router and enable

the new settings.

To set up your wireless interface,

you must first give it an SSID

(Service Set Identifier). The SSID

is a unique identifier attached to

packets sent over WLANs. This

identifier emulates a password

when a wireless device attempts

communication on the WLAN.

Because an SSID distinguishes

WLANs from each other, access

points and wireless devices trying

to connect to a WLAN must use the

same SSID.

Also, if you want to protect

ASUS Wireless Router