Asus WL-500g 사용자 설명서 - 페이지 38
{카테고리_이름} Asus WL-500g에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus WL-500g 43 페이지. For 802.11g/b wireless clients
Asus WL-500g에 대해서도 마찬가지입니다: 사용자 설명서 (26 페이지)
Chapter 3 - Software Configuration
Wireless (Cont.)
AP Mode
AP (Access Point) Mode configures the ASUS Wireless Router for a specific
application. By default, the ASUS Wireless Router is configured as an
Access Point which enables wireless mobile clients to connect wirelessly
to a wired Ethernet network. The following options are available from the
drop-down list:
AP Only: the ASUS Wireless Router acts only as an Access Point.
WDS Only (WL500g/WL500g Deluxe): the ASUS Wireless Router
can only communicate with other Access Points.
Hybrid: Hybrid allows you to use the ASUS Wireless Router both as
an access point and as a wireless bridge.
Channel
Both Access Points in Wireless Bridge mode must be set to the same channel.
Connect to APs in Remote Bridge List (Yes/No)
Select Yes to connect to access points in the remote bridge list.
Allow anonymous? (Yes/No) (WL500g/WL500g Deluxe)
Select Yes to allow users without accounts to connect.
Note: If "Connect to APs in Remote Bridge List" and "Allow Anony-
mous" are both set to "No", it means that this AP will not connect with
other APs and therefore the AP mode setting will return to "AP Only".
38
ASUS Wireless Router