Asus WL-566gM - 240 MIMO Wireless Router 사용자 설명서 - 페이지 5

{카테고리_이름} Asus WL-566gM - 240 MIMO Wireless Router에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus WL-566gM - 240 MIMO Wireless Router 25 페이지. 240 mimo wireless router

페이지 인쇄

3. Conﬁguring the wireless router

Note:

1) Before you start, we recommend using a wired connection for initial

conﬁguration, which may avoid possible setup problems due to wireless

uncertainty.

2) ASUS also provides an EZSetup button for fast wireless conﬁguration.

If you would like to use EZSetup for your wireless network conﬁguration,

please refer to chapter 6 for more information.

The ASUS Wireless Router can meet various working scenarios with proper conﬁguration. The

default settings of the wireless router may need change so as to meet the individual needs;

therefore, before using the ASUS Wireless Router, check the basic settings to make sure they all

work in your environment.

You can conﬁgue the ASUS Wireless Router via your web browser. Connect a notebook PC or

desktop PC to your ASUS Wireless Router (either directly or through a hub) with an Ethernet cable,

or to establish a wireless connection between the terminal and the wireless router.

For the wireless connection, you need an IEEE 802.11b/g compatible device, such as an ASUS

WLAN card. Disable encryption and set the SSID to "default" on your wireless card. If you want to

conﬁgure the ASUS Wireless Router so as to access the Internet, you must have correct TCP/IP

settings. Set the IP address of your terminal within the same subnet of your ASUS Wireless Router.

1) ASUS Wireless Router wired connection

The ASUS Wireless Router is supplied with an Ethernet cable in the package. Since the ASUS

Wireless Router has integrated auto-crossover function, therefore, you can use either straight-

through or crossover cable for wired connection. Plug one end of the cable to the WAN port on the

rear panel of the router and the other end to the Ethernet port of your ADSL or Cable modem.

Wireless-Connection

Refer to your wireless adapter user manual for how to associate with a wireless router. The

default SSID of the ASUS Wireless Router is "default" (in lower case), encryption is disabled

and open system authentication is used.

Note: If conﬁguration is done via wired connection, ignore this.

2) Setting IP address for wired or wireless connection

Getting IP address Automatically

The ASUS Wireless Router integrates DHCP server

functions, therefore, you can make your PC to get the IP

address automatically from the ASUS Wirelesss Router.

Note: Before rebooting your PC, the ASUS Wireless

Router should be switched ON and in ready state.

WL-566gM Wireless Router User Manual