Asus WL-AM604g 사용자 설명서 - 페이지 24
{카테고리_이름} Asus WL-AM604g에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus WL-AM604g 34 페이지. Wireless adsl router
Asus WL-AM604g에 대해서도 마찬가지입니다: 사용자 설명서 (34 페이지), 인터넷 구성 매뉴얼 (7 페이지)
페이지 인쇄
WL-AM604g 11g WiFi ADSL Router User Manual
xDSL
LAN
4
3
2
1
!
AP
LINK
ACT
MAC filter
You can set up MAC filters to allow or deny wireless clients with known MAC addresses.
To set up MAC filter:
1. Click Wireless -> MAC Filter in the left side menu to open the configuration page.
2. Select the restriction mode for the filter: select Allow to allow the client and deny
the rest; select Deny to deny the client and allow the rest. By default, the filter is set
to Disable which allows all clients. Click Add to create a filter.
2. Type the MAC address of the wireless client you want to allow or block.
3. Press Save/Apply to save and activate the settings.
Wireless bridge
You can connect WL-AM604g to other wireless bridges so as to expand your wireless
LAN. This function is also refer to as the Wireless Distribution System (WDS).
To set up WDS, the wireless routers must meet the following requirements:
1. Using the same encryption.
2. Working on the same channel.
3. The IP addresses of all wireless bridges are within the same subnet.
4. WDS enabled.
5. For bridging wireless routers, the MAC Addresses of the uplink wireless router must
be saved to the Remote Bridge List. For uplink wireless router, MAC addresses of
all bridging router must be saved.
Example: WL-AM604g(wireless bridge with Internet access), WL-500gP (wireless
bridge), and WL-500gD (wireless bridge). Refer to the illustration on the next page.
SSID
DHCP server
LAN IP address
Authentication
Encryption
Remote bridge
MAC address
Channel
22
WL-AM604g
ASUS
Enabled
192.168.1.1
Open
WEP-128bit
00:01:00:01:01:02
00:01:00:01:01:03
00:01:00:01:01:01
11
WL-500gD
ASUS
Disabled
192.168.1.2
Open
WEP-128bit
00:01:00:01:01:01
00:01:00:01:01:02
11
WL-500gP
ASUS
Disabled
192.168.1.3
Open
WEP-128bit
00:01:00:01:01:01
00:01:00:01:01:03
11