Baumer HUBNER TDP0,2E LT-4 B10 55 CA 설치 및 작동 지침 - 페이지 7
{카테고리_이름} Baumer HUBNER TDP0,2E LT-4 B10 55 CA에 대한 설치 및 작동 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer HUBNER TDP0,2E LT-4 B10 55 CA 28 페이지. Tachogenerator (doppel-tachogenerator), tachogenerator (twin tachogenerator)
Baumer HUBNER TDP0,2E LT-4 B10 55 CA에 대해서도 마찬가지입니다: 설치 및 작동 지침 (32 페이지)
페이지 인쇄
2
Security indications
2.1
Risk of injury due to rotating shafts
Hair and clothes may become tangled in rotating shafts.
• Before all work switch off all voltage supplies and ensure machinery is stationary.
2.2
Risk of destruction due to mechanical overload
Rigid mounting may give rise to constraining forces.
• Never restrict the freedom of movement of the device.
The mounting instructions must be followed.
• It is essential that the specified clearances and/or angles are observed.
2.3
Risk of destruction due to mechanical shock
Violent shocks, e. g. due to hammer impacts, can lead to the destruction of the device.
• Never use force.
Mounting is simple when correct procedure is followed.
• Use suitable puller for dismounting.
2.4
Risk of destruction due to contamination
Dirt penetrating inside the device can damage the device.
• Absolute cleanliness must be maintained when carrying out any work on the device.
• Never allow lubricants to penetrate the device.
2.5
Risk of destruction due to adhesive fluids
Adhesive fluids can damage the magnets and the carbon brushes. Dismounting a device, se-
cured to a shaft by adhesive may lead to the destruction of the device.
2.6
Explosion risk
Do not use the device in areas with explosive and/or highly inflammable materials.
They may explode and/or catch fire by possible spark formation.
MB079a - 11068397
Baumer_TDP02-TDPZ02-B3_DE_EN_202209_MI_11068397 (22A1)
Security indications
2
4