Asus AP6000 하드웨어 참조 매뉴얼 - 페이지 10

{카테고리_이름} Asus AP6000에 대한 하드웨어 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus AP6000 32 페이지. Dual pentium® ii server

Tools Required

A Phillips (cross) and standard (flat) screwdriver is needed to install or re-

move the components in this server.

1. Unpack your server, do not connect the power cord.

IMPORTANT:

fixed On and Off switch located on the front. This server uses an

ATX power supply that is normally off until an electrical signal is given to

the power supply through a momentary switch located on the front of the

server. There is always a standby power in the power supply in order for

ATX power supply features to work, therefore removing the power cord is

necessary to prevent electrical shocks when working on the server com-

ponents.

2. Unlock the keylocks if necessary. This server is equipped with three

security locks to prevent unauthorized access. Turn the key counterclock-

wise to unlock and clockwise to lock the side panels or front door.

3. Open the front door and side panels to install final server components,

such as CPU, Memory, Hard Disk Drives, expansion cards. Use this

hardware reference guide along with your motherboard manual in order

to make these installations.

4. Connect a Keyboard and Mouse (purchased separately)

5. Connect a VGA-compatible monitor (purchased separately)

6. Connect a printer to the parallel port if desired.

7. Connect server to network (an optional network card is needed)

WARNING:

plug telecommunications/telephone cables into the network RJ45

connector in the server if one is installed.

8. Connect power cord to the server's power supply.

9. Connect Server to AC power - The power supply will automatically de-

tect and adjust to 120VAC or 240VAC power.

WARNING:

(earthed) outlet. To reduce the risk of electrical shock or damage to

your server, do not bypass the grounding plug.

I. Introduction

Most servers uses an AT power supply that has a

To prevent electrical shock or fire, be sure not to

This server is designed for connection to a grounded

AP6000 Hardware Reference Guide