Asus AP7500 하드웨어 참조 매뉴얼 - 페이지 22
{카테고리_이름} Asus AP7500에 대한 하드웨어 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus AP7500 40 페이지. Pentium ii corporate server
페이지 인쇄II. System Components
SCSI Backplane
The SCSI backplane of this server is comprised of two SCSI boards with a
Wide-SCSI connector, power input, and SCSI ID dip switches on each SCSI
board. This configuration allows Wide-SCSI hard disk drives to be docked
into the server using a common connector. The female end is located on the
SCSI board, while the male end is located on the hot-swap tray.
SCSI Board Placement
There are three screws on each side of the SCSI board. Both sides of the
cabinet side panels must be removed to access these screws. Please note
that notches on the top and bottom of the SCSI board must be placed as
shown in order to properly seat the SCSI boards into the chassis. The SCSI
board will only fit in one orientation but may be interchanged between the
top and bottom half. Be aware of the SCSI ID setting of each SCSI board.
SCSI board placement
SCSI board front side
22
AP7500 Hardware Reference Guide
Top Half
Bottom Half
Notch Out (top)
Four SCSI Board
Docking Connectors
Notch In (bottom)