Baumer EXG03c 사용자 설명서 - 페이지 8

{카테고리_이름} Baumer EXG03c에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer EXG03c 42 페이지. Gigabit ethernet
Baumer EXG03c에 대해서도 마찬가지입니다: 사용자 설명서 (42 페이지)

Baumer EXG03c 사용자 설명서

Timings:

A - exposure time
frame (n) effective
B - image parameters
frame (n) effective
C - exposure time
frame (n+1) effective
D - image parameters
frame (n+1) effective
Image parameters:
Offset
Gain
Mode
Partial Scan
8
2.2.
Timings
The image acquisition consists of two seperate, successively processed components.
Exposing the pixels on the photosensitive surface of the sensor is only the first part of the 
image acquisition. After completion of the first step, the pixels are read out.
Thereby the exposure time (t
ed for the readout (t
) is given by the particular sensor and used image format.
readout
Baumer  cameras  can  be  operated  with  two  modes,  the  Free  Running  Mode  and  the 
Trigger Mode.
The cameras can be operated non-overlapped
used, and the combination of exposure and readout time:
Non-overlapped Operation
Here the time intervals are long enough 
to process exposure and readout succes-
sively.
Exposure
Readout
Due  to  the  differing  CMOS  sensor  models  installed  to  the  Baumer  EXG  cameras,  the 
operation modes are subdevided into the respective camera models.
2.2.1. Free Running Mode
In the "Free Running" mode the camera records images permanently and sends them to 
the PC. In order to achieve an optimal (with regard to the adjusted exposure time t
and image format) the camera is operated overlapped.
In case of exposure times equal to / less than the readout time (t
mum  frame  rate  is  provided  for  the  image  format  used.  For  longer  exposure  times  the 
frame rate of the camera is reduced.
2.2.1.1.
EXG03 / EXG03c
t
Exposure
Readout
Flash
t
 = t
flash
exposure
*)
Non-overlapped means the same as sequential.
) can be adjusted by the user, however, the time need-
exposure
 or overlapped. Depending on the mode 
*)
In this operation the exposure of a frame 
(n+1) takes place during the readout of 
frame (n).
Exposure
Readout
t
exposure(n)
exposure(n+1)
t
readout(n)
t
t
flash(n)
flash(n+1)
t
flashdelay
Overlapped Operation
 ≤ t
), the maxi-
exposure
readout
t
readout(n+1)
exposure