Baumer FLDK 110G1005/S42 사용자 설명서 - 페이지 20

{카테고리_이름} Baumer FLDK 110G1005/S42에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer FLDK 110G1005/S42 35 페이지. Laser copy counter

9.3

Sensitivity

Because the Scatec cannot discern between a front edge (which the customer wishes to detect) and a

spot on the object similar to an edge (e.g. crests or creases in the paper, creases in a carton etc), the

sensitivity of the sensor should be adjusted to the edge thickness to be detected. This means that the

sensor should be set to a sensitivity at which it detects all leading edges without being sensitive enough

to react to edge-like spots on the object thinner than the actual edge thickness.

It is possible to choose between two different sensitivity levels with DIP switch 4.

A diagram of the sensitivity in relation to the working distance and transportation speed is shown in Section

10.6.

9.4

Variation of the working distance

The thickness that an edge must have to be detected by the SCATEC-2 depends on the working distance.

The SCATEC-2 is most sensitive at the nominal working distance which is 40mm (FLDK 110x1003/Sxx

and FLDK 110x1303/Sxx) or 100mm (FLDK 110x1005/Sxx and FLDK 110x1006/Sxx). The relationship

between the sensitivity and the working distance is contained in the specifications in Section 10.6.



the sensitivity of the sensor varies with the working distance

Manual SCATEC-2

Version 2021-09

www.baumer.com

Baumer Electric AG

Frauenfeld, Switzerland