Baumer FLDK 110G1303/S14 사용자 설명서 - 페이지 9

{카테고리_이름} Baumer FLDK 110G1303/S14에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer FLDK 110G1303/S14 35 페이지. Laser copy counter

Overlap: a

Edge thickness: k

Front edge

Tail edge

Running direction

Dead time t

False pulse

Manual SCATEC-2

Version 2021-09

Distance between two successive edges, measured along the

conveying plane. (Also referred to as the object spacing.)

Thickness of the copy at the point where the edge is to be detected.

The edge of an object facing the laser beam. Front edges are detected

by the sensor.

The edge of an object facing away from the laser beam. Tail edges are

not detected by the sensor unless they are pointing upwards.

The preferred running direction (front edges leading) is indicated. The

opposite direction is also permitted by the SCATEC-2.

The sensor responds to an edge with an output pulse with length p. The

dead time begins when the pulse

is issued. The sensor can only

issue the next pulse after both the

dead time t and the output pulse p

have expired. This means: an

edge detected by the beam while

still either the dead time t or the the

output pulse p is on does not

initiate an output pulse.

Output pulse generated by an

edge which should not be counted.

www.baumer.com

Output pulse

Dead time

Baumer Electric AG

Frauenfeld, Switzerland