Doveet S657 사용 설명서 - 페이지 5

{카테고리_이름} Doveet S657에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Doveet S657 7 페이지.

페이지 인쇄

3.7 UP KEY

• Under time mode, press "UP" key to switch °C/°F display.

• Under time, date, temperature alert, snooze mode, press "UP" key to go forward one step,

press and hold "UP" key a few seconds to go forward 8 steps per second.

• Under temperature alert mode, press "UP" key to turn alert on/oﬀ.

3.8 DOWN KEY

• Under time mode, press "DOWN" key to switch 12/24H display.

• Undertime, calendar, temperature alert, snooze mode, press "DOWN" key to go back one

step, press and hold "DOWN" key for a few seconds to go back 8 steps per second.

• Under temperature alert mode, press "DOWN" Key to turn alert on/oﬀ.

• Under normal mode, press "DOWN" key for a few seconds to RCC Receiving.

Under RCC receiving, press "DOWN" key to exit.

3.9 ALERTS KEY

• Under time mode, press "ALERTS" key to check temperature alert for both highest and

lowest indoor and outdoor temperature. Checking in sequence:

highest outdoor temperature→lowest outdoor temperature→highest indoor

temperature→lowest indoor temperature(cycle display).

• Under time mode, press and hold "ALERTS" key for a few seconds to enter temperature

alert setting for both highest and lowest indoor and outdoor temperature, setting

sequence: outdoor highest temperature→outdoor lowest temperature→indoor highest

temperature→indoor lowest temperature→Exit.

3.10 Comfort Level

• HUMID: When the humidity is more than 70%.

• GOOD: When the temperature is between(20°C - 28°C/68°F - 82.4°F) and the humidity is

between 40 - 70%.

• DRY: When the humidity is less than 40%.

• No comfort level shown on the display when the temperature is out of the appropriate

range(20°C - 28°C/68°F - 82.4°F) and the humidity is between 40% - 70%.

4. Other Functions

4.1 Alarm Function

• Under time mode, press "ALARM" to turn on/oﬀ the alarm in sequence:

AL1 ON→AL2 ON→AL1 and AL2 ON→AL1 and AL2 OFF.

• When the alarm is turned on and the alarm reaches the set time, it rings. Press

"SNOOZE/LIGHT" key to turn on snooze, the symbol and corresponding alarm will ﬂash

continuously; press any other key to stop the alarm.

• If no key is pressed, the alarm stops automatically after 2 minutes.

• While the alarm rings, the corresponding AL character will ﬂash on the display.

• Under snooze mode, the corresponding AL character and Snooze symbol will ﬂash on the

display. Press "SNOOZE/LIGHT" to turn on the backlight, press any other key to stop and

exit at the same time and alarm will turn oﬀ.

• When the alarm or snooze is active, and the RCC is waiting, the RCC will not operate until

the alarm or snooze is ﬁnished

• If the alarm time is the same for both AL1 and AL2,only AL1 symbol will ﬂash on the display

when times up.

• When an alarm and snooze time are set at the same time,the later alarm will start beeping

and stop the ﬁrst one.

• Snooze can be repeated indeﬁnitely.

• Alarm's rhythm, diﬀerence in 2 minutes:

A. 0-10 second: Beep per second.

B. 10-20 seconds: BIBI per second.

C. Over 20 seconds: BIBIBIBI per second.

4.2 Snooze interval setting

• Under normal mode.press the "SNOOZE/LIGHT" key for a few seconds to enter snooze

interval setting (optional from3minutes to 20 minutes, default: 5 minutes)

-4-