Dover PSG Blackmer TXD1200 Series 설치, 작동 및 유지보수 지침 - 페이지 2
{카테고리_이름} Dover PSG Blackmer TXD1200 Series에 대한 설치, 작동 및 유지보수 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dover PSG Blackmer TXD1200 Series 12 페이지.
페이지 인쇄
Failure to set the vehicle emergency
brake and chock wheels before
performing service can cause severe
personal injury or property damage.
Hazardous pressure
can cause personal
injury or property
damage
Failure to relieve system pressure prior
to performing pump service or
maintenance can cause personal injury
or property damage.
Hazardous pressure
can cause personal
injury or property
damage
Failure to disconnect and lockout
electrical power or engine drive before
attempting maintenance can cause
severe personal injury or death
Hazardous
machinery can
cause serious
personal injury.
PUMP IDENTIFICATION
A pump Identification tag, containing the pump serial number, I.D. number, and model designation, is attached to each pump. It is
recommended that the data from this tag be recorded and filed for future reference. If replacement parts are needed, or if
information pertaining to the pump is required, this data must be furnished to a Blackmer representative.
TECHNICAL DATA
Maximum Operating
Temperature *
Maximum Speed
size 2, 2.5
size 3
Maximum Viscosity
Maximum Differential
Pressure
Maximum Working
Pressure
* Maximum operating limits are dependent on the materials of
construction. See Blackmer Material Specs 201-093.
SAFETY DATA
PUMP DATA
TXD1200 Models
240 – 300°F (115 – 149°C)
1200 RPM
900 RPM
100 SSU (22 Cst)
125 psi (8.6 Bar)
175 psi (12.1 Bar)
201-D00
Disconnecting fluid or pressure
containment components during pump
operation can cause serious personal
injury, death or major property damage
Hazardous pressure
can cause personal
injury or property
damage
If pumping hazardous or toxic fluids,
system must be flushed prior to
performing service
Hazardous or toxic
fluids can cause
serious injury.
Operation without guards in place can
cause serious personal injury, major
property damage, or death.
Do not operate
without guard
in place
INITIAL PUMP START UP INFORMATION
Model No.: ___________________________________
Serial No.: ___________________________________
Date of Installation: ___________________________
Pressure Gauge Reading: ______________________
Vacuum Gauge Reading: _______________________
Flow Rate: ___________________________________
page 2/12