Dover PSG Mouvex CENTREX MULTI 2T 설치 운영 및 유지보수 - 페이지 2
{카테고리_이름} Dover PSG Mouvex CENTREX MULTI 2T에 대한 설치 운영 및 유지보수을 온라인으로 검색하거나 PDF를 다운로드하세요. Dover PSG Mouvex CENTREX MULTI 2T 11 페이지.
페이지 인쇄
MEASURED UNLOADING UNIT MOUVEX
SAFETY, STORAGE, INSTALLATION AND MAINTENANCE INSTRUCTIONS
Definition of safety symbols
This is a SAFETY ALERT SYMBOL.
When you see this symbol on the product, or in the manual,
look for one of the following signal words and be alert to the
potential for personal injury, death or major property damage.
Warns of hazards that WILL cause serious personal injury,
death or major property damage.
Warns of hazards that CAN cause serious personal injury,
death or major property damage.
Warns of hazards that CAN cause personal injury or property
damage.
Indicates special instructions which are very important and
must be followed.
REMARKS :
MOUVEX CENTREX MULTI 2 units MUST be installed in systems
designed by qualified personnel. The installation MUST be in compliance
with local standards, national regulations and rules of safety.
This manual is designed to permit installation and commissioning
of MOUVEX CENTREX MULTI 2 units and MUST accompany the
compressor.
Maintenance of MOUVEX CENTREX MULTI 2 units must ONLY
be carried out by qualified technicians. This maintenance must
meet local and national standards as well as all safety regulations.
Read this manual, including all instructions and warnings, in
full BEFORE any use of MOUVEX CENTREX MULTI 2 units.
Do not remove the warning and use label stickers that are
found on the compressors.
NT 1006-C00 03 18 Centrex Multi 2 e
MODEL : CENTREX MULTI 2
DANGER
WARNING
CAUTION
NOTICE
TABLE OF CONTENTS
1. OVERALL DIMENSIONS . . . . . . . . . . . . . . . . . . . . . . . . . .4
2. GENERAL DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.1 Principle of operation . . . . . . . . . . . . . . . . . . . . . . . . . .5
2.2 Operating characteristics . . . . . . . . . . . . . . . . . . . . . . .6
2.3 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
3. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3.1 No return valve item 15 calibration . . . . . . . . . . . . . . . .7
3.2 Pipe diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3.3 Piping assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3.4 Degassing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
3.5 Direction of rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
shafts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
3.7 Electric motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
3.8 Sealing of the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
4. STORAGE CONDITIONS . . . . . . . . . . . . . . . . . . . . . . . . . .9
5. PRODUCTS UNLOADED . . . . . . . . . . . . . . . . . . . . . . . . . .9
5.1 Class of products and installation zone . . . . . . . . . . . .9
5.2 Compatible products . . . . . . . . . . . . . . . . . . . . . . . . . . .9
6. MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
6.1 Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
6.2 Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
7. SCRAPPING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
8. CERTIFICATE OF CONFORMITY . . . . . . . . . . . . . . . . . .11
ADDITIONAL DOCUMENTATION
The table below gives the list of instructions in addition
to this central instruction :
PF80 CC8 filter
CC8-65 pump
Meter SBM150
Motor
Seal chassis
CENTREX MULTI 2 unit
CC8-65 ATEX pump
2/11
Page
Application
Spare parts list
Instructions
NT 1011-G00
-
NT 1010-D00
-
NT MA/027/00 MA/026/027/038
Supplier NT
-
NT 1011-M00
-
-
PL 1006-C01
NT 1063
-