Amphenol Protimeter ReachMaster Pro 사용 설명서 - 페이지 14

{카테고리_이름} Amphenol Protimeter ReachMaster Pro에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amphenol Protimeter ReachMaster Pro 20 페이지.

5.1 Measurement Mode (cont.)

A special feature to change the measurement sensitivity

helps the device measure better in different materials. Press

and hold

enable the sensitivity keys. Once the sensitivity is enabled,

an indication

sensitivity, based on need after enabling the sensitivity.

Example: To zero in on the wettest areas to find the

source of moisture, decrease the sensitivity to extend the

measurement range.

If a comparison needs to be made on surfaces, the reference

mode can be used. During measurement, press and hold

the

for 2 seconds to allow the unit to enter reference

mode, taking the current measurement as the base. Further

measurement will be a comparison from the base.

Example: To compare a known dry area with other areas in

the building, take a reference reading from the dry area and

compare the new readings without having to manually record

the referenced dry reading.

ReachMaster Pro provides an option to enable, disable or

change features like, including buzzer, display brightness,

data transmission rate, etc. At any point of time when the

unit is turned ON, if the

enter the Settings screen.

If any setting needs to be changed or adjusted, the function/

parameter can be selected by scrolling through the menu

using

In the Settings menu, select LANGUAGE by navigating with

will be highlighted). Change the language using

keys and when the desired language is highlighted, press

to select it.

14 | INS5777A - 04/2020

while in measurement for 2 seconds to

will be seen on screen. Press either

to increase the sensitivity or to decrease the

and then pressing

keys. Press

button is pressed, the unit will

to select the language (language