Amphenol HYP-3048 사용자 설명서 - 페이지 11

{카테고리_이름} Amphenol HYP-3048에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amphenol HYP-3048 13 페이지.

1.3.4 Cable Routing

In general, the HYP-3048 works best for routing cable upwards to overhead cable management.

When routing jumpers in the front of the rack, all cables should be routed downwards and then

wrap around the spool, as shown below.

Figure 8 - Routing Jumpers on the Front

Figure 10 - Rear Trunk Routing

Figure 9 - Fiber Jumper Length

As shown above, the rear of the rack has tie-off brackets for routing the cables into the panel –

these are recommended to be used both when clamping is and isn't used in the C2X.

Amphenol Network Solutions

PN 152305 Rev. A0

HYP-3048

509.926.6000 — amphenol-ns.com