Dover Triton 9640 전환 절차 - 페이지 6
{카테고리_이름} Dover Triton 9640에 대한 전환 절차을 온라인으로 검색하거나 PDF를 다운로드하세요. Dover Triton 9640 10 페이지.
페이지 인쇄
Backplane end
Polarizing Pin
9600 Dispenser Power Cable - Connectors
5. Route the free end of the cable (the end with the
seven-position connector) down through the oval slot
beneath the card cage.
Dispenser end of mech
power cable.
Feed dispenser end of mech power cable
down through oval slot under card cage.
6. Carefully pull the cable into the security cabinet.
Feed dispenser-end of mech power
cable down through oval slot. Pull cable
into security cabinet.
T
S
RITON
YSTEMS
9640-
C
ONVERSION
Dispenser end
Polarizing Pin
-9600
TO
P
ROCEDURE
7. Route the dispenser power cable through the cabinet
cable clips.
Route dispenser power cable through
cable clips.
8. In the card cage, clip the Ferrite Module onto the
dispenser power cable.
Clip Ferrite Module to mech power cable.
9. Close the power supply and install the two mounting
screws back into the power supply plate. Reconnect
the power plugs that were removed previously (except
for the 9640 power cable, which is no longer required).
6