Dahua VTO2000A-C 빠른 설치 매뉴얼 - 페이지 10
{카테고리_이름} Dahua VTO2000A-C에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua VTO2000A-C 13 페이지. Video door entry system
VTH Monitor Configuration
For both the VTO and VTH to communicate, each unit must have the IP address details of the other unit. To add the VTO unit to the
VTH, select Network and input the VTO units IP address and set Enable Status to ON.
To add the VTH to the VTO, revisit the VTO web browser and go to System Config > Indoor Manager > Add. Input a family name, first
name and Nickname, these are purely for reference. Enter the VTH Short number This number must match the Room Number set in
the VTH Product Info page. For details on self password see page 11.
Click OK to confirm the setting.
Repeat the process for additional monitors, each time setting the monitor to a unique IP address and Room Number.
To program the module buttons, go to System Config > Local Config > Facade Layout. On the module images, click the relative
buttons to assign a specific apartment number to it.
10