Dover HYDRO EvoWash 빠른 시작 매뉴얼 - 페이지 12
{카테고리_이름} Dover HYDRO EvoWash에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dover HYDRO EvoWash 19 페이지.
페이지 인쇄
programming (continued)
Program Mode Menus (continued)
At the top of Menu 2 (with a blinking middle digit 2), press the Scroll key to move to the "Adjustments" menu appropriate for
the Detergent Control Mode defined in Menu 21. That will be either Menu 3 for Probe Mode, or Menu 4 for Probeless Mode.
Program Mode Menu 3:
Probe Mode Adjustments
000
From
Menu 2
Detergent Tank Reading
000
Detergent Set Point
32
0
Live Conductivity Display
2 3 2
0
Rinse Pump Speed
033
Low Detergent Alarm Delay
034
Rinse Feed Option
035
036
12
Program Menu 3
3
Idle Home Screen
3 1
000
0
0
400 = Factory Default
00
1
4
000
00
000
10.0 = Factory Default
00
000
00
0 0 0
00
0001
Rinse Delay Time
00
000
Idle Home Screen
0 0 0
—
0 0 0
—
To Blinking
Blinking Idle Home Screen
0 0
A live Conductivity reading from
the probe installed in wash tank.
0 0
Set Point can be from 0 to 999.
2 = Factory Default
2
1 = Yes, display Conductivity after User Menu 14.
2 = No, do not display Conducitivity in User Menu.
1
0
0
Speed can be from 0 to 59.5 RPM.
Press
0 = Factory Default
00
Number of racks for delay, can be from 0 to 99.
Door Machine Only
1 = Factory Default
1 = Dispense Rinse on Rinse Signal
2 = Dispense Rinse on Detergent Signal
Door Machine Only
00 = Factory Default
0
0
0
Delay can be from 0 to 19 seconds.
Exit Program Mode
& Return to User Mode
To
Menu 2
&
together to test delivery.