Dahua VTO2202F-P 빠른 설치 매뉴얼 - 페이지 6

{카테고리_이름} Dahua VTO2202F-P에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dahua VTO2202F-P 12 페이지. 2mp single outdoor station camera

VTH Monitor Conﬁ guration

Before conﬁ guring the VTH it must ﬁ rst be initialised. Follow the on screen wizard to set an admin password. The password can only

be made up of numbers.

To conﬁ gure the VTH unit use the built in menu within the monitor itself. VTH units do not support web browser conﬁ guration.

Hold down the Settings button for 5 seconds and enter the admin password set during the initialisation wizard.

If the settings button is only pressed and not held, entering the password 123456 will enter the user settings rather than engineer

settings.

In the settings menu select Network to conﬁ gure the VTH network settings. When conﬁ guring the network address of the VTH it is vital

to ensure the IP address range is within the same Subnet as the VTO.

Tel: +44 (0)1457 874 999 | Fax: +44 (0)1457 829 201 | Email: [email protected] | Online: www.cop-eu.com