Advanced Axis AX-I/O-48 설치 지침 매뉴얼 - 페이지 6

{카테고리_이름} Advanced Axis AX-I/O-48에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Advanced Axis AX-I/O-48 20 페이지. Switch led modules

To install a Switch LED Module in a local zone annunciator cabinet, remove the inner plate of the AX-LZA-CAB by

removing the four (4) screws holding the inner plate to the cabinet and removing the inner plate ground wire from

the cabinet pluggable ground stud. Place the Switch LED Module between the four (4) module mounting studs and

secure with the provided washers and nuts (see figure 4). Replace the inner plate and ground wire to the AX-LZA-

CAB.

AX-LZA-CAB1

AX-LZA-CAB2

Inner Door

AX-LZA-CAB4

Inner Door

Figure 4 – Switch LED Module Remote Cabinet Mounting

Note: For detailed AX-LZA-CAB mounting instructions refer to installations instructions provided with the

AX-LZA-CAB.

2.3 AX-I/O-48 Other Cabinet Mounting

In addition to being mounted in cabinets previously mentioned, the AX-I/O-48, Switch LED Driver Module, can also

be installed in an Advanced AX-GCAB (Listed general cabinet) or an ANSI/UL Listed 3

party annunciator

enclosure.

Mount the Advanced AX-GCAB, general purpose UL Listed enclosure, in a clean, dry environment. Remove the

AX-I/O-48 module from its shipping package and securely install it within the AX-GCAB enclosure with the stand-

offs and screws provided with the AX-I/O-48 module (see figure 5).

Figure 5 – AX-I/O-48 General Purpose Cabinet Mounting