Dover Markem Imaje 9330 안전 및 중요 정보 - 페이지 3

{카테고리_이름} Dover Markem Imaje 9330에 대한 안전 및 중요 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Dover Markem Imaje 9330 14 페이지.

페이지 인쇄

This manual comprises a text section and an

illustrated section. You will find the illustrated

section at the end of the text section.

Keep this information to hand so you can refer

back to it at a later date.

■ Important note

Find all of your product's documentation on our

website by scanning the QR code on the cover or

by visiting www.markem-imaje.com.

WARNING

Risk of puncture

When replacing the

cartridges, do not touch the

nozzle.

■ Safety

This equipment design generally applies to

industrial equipment to be installed in areas where

only adults are normally present.

Before using this printer, please read and fully

comply with these instructions, the material safety

data sheet (MSDS) for consumables used, and

safety labels affixed to the printer.

Servicing

must

knowledgeable or qualified people who are

appropriately trained.

■ Liability

Markem-Imaje shall not be liable for any damage

or injury resulting from any failure to follow these

safety instructions, as well as good manufacturing

practices and safety standards that are generally

applicable in the industry, when installing, using or

servicing Markem-Imaje equipment.

Any user who modifies or repairs Markem-Imaje

equipment, uses consumables, spare parts or

accessories other than those supplied by Markem-

Imaje, or fails to comply with Markem-Imaje

specifications shall have sole responsibility for the

consequences thereof.

Markem-Imaje shall not be liable for any

malfunction or damage caused by any modification

of the equipment or use of the equipment for any

purposes other than those for which it is designed.

The user shall be solely responsible for taking any

precautions required by any use to which the user

10106923-AA

performed

only

puts the Markem-Imaje equipment.

Markem-Imaje

consumables

products and other consumables), spare parts and

accessories are designed for use with Markem-

Imaje equipment.

Use of consumables, spare parts or accessories,

that are not produced or recommended by

Markem-Imaje for use with the specific Markem-

Imaje equipment may harm the equipment and

cause performance failures.

Because Markem-Imaje equipment is tested with

Markem-Imaje consumables and spare parts for

conformity with certain regulations and safety

standards, use of non-Markem-Imaje consumables

and spare parts also may be inconsistent with

testing conditions and affect compliance of the

equipment with certain standards. The user shall

bear all risks associated with use of unsuitable

consumables and spare parts.

This equipment is certified in accordance with the

requirements for CE marking.

■ Health / Hygiene /

Environment

For certain consumables:

□ Wearing contact lenses when handling these

consumables is strictly prohibited.

□ Ink-resistant gloves and safety goggles are

recommended during cleaning operation.

Max. noise level

Operating temperature

Humidity

The use of certain inks may limit the temperature

and humidity ranges (see the ink specification

sheet).

The printer must not be used in explosive

atmospheres.

■ Fire prevention

CAUTION: For continued protection against

possible fire, use only the ink/additive mixtures

specified by Markem-Imaje.

If your printer uses flammable ink or additive:

□ Never leave containers containing ink, additive

or cleaning products, or ink-soaked rags (even

dry) near the printer.

□ Install a foam, CO2 or powder extinguisher

immediately adjacent to the printer (maximum 10

meters).

□ Never smoke near the printer. Affix a sign «NO

English

(inks,

cleaning

< 70 dbA

+5°C to +40°C

(+41°F to +104°F)

0 - 90% RH with no

condensation