amphis 109001BB 설치 매뉴얼 - 페이지 2

{카테고리_이름} amphis 109001BB에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. amphis 109001BB 8 페이지. 3 blade ceiling fan

L U N A – I N S T A L L A T I O N M A N U A L

Thank you for purchasing this quality Amphis product.

Please read carefully before installation.

W A R R A N T Y

This Amphis product is covered by a 3-year residential warranty. The warranty period starts

from date of purchase. Proof of purchase will be required.

Warranty will be void if the product is not assembled and installed by a licensed electrician,

is used with a non-compatible dimmer, or if there is any damage due to improper usage or

modification to the luminaire.

S A F E T Y I N S T R U C T I O N S

1 The installation MUST be carried out by a qualified electrician.

2 Turn off the main electrical switch at the circuit breaker fuse box before performing any

installation or electrical works.

3 The ceiling fan must be grounded/earthed; electrical supply of 230V AC 50Hz.

4 The live and neutral supply wires must be connected to the wall switch (double poles) having a

contact separation at least 3mm in all poles.

5 The ceiling fan must be mounted with the blades at least 2.3m from the floor to minimise the

possibility of accidental contact with the fan blades.

6 When assembling the ceiling fan, ensure that the down rod is threaded firmly to the fan body.

Make sure that the down rod screw is set tightly against the down rod after the ceiling fan is

assembled to avoid unthreading.

7 Never install the ceiling fan in any area where ceiling fan could possibly get wet.

8 Never insert anything into the fan blades when the ceiling fan is in operation.

9 When installing, ensure that the rotating fan blades will not come into contact with any objects.

10 After ceiling fan is properly installed, ensure that all connections are secure to prevent ceiling

fan from dropping.

11 It is recommended to examine the suspension system twice a year.

WARNI N G

1 To reduce the risk of fire or electric shock, never use the ceiling fan with any solidstate speed

control device.