amphis 109001BW 설치 매뉴얼 - 페이지 5

{카테고리_이름} amphis 109001BW에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. amphis 109001BW 8 페이지. 3 blade ceiling fan

L U N A – I N S T A L L A T I O N M A N U A L

body) until the "Card Point" on the mounting bracket has dropped into the "Card Slot" on the

hanger ball and is firmly secure. (Fig. 6)

4 Connect electrical wires accurately according to the diagram. (Fig. 7)

5 After wires are connected, put the remote control receiver into the mounting bracket.(Fig. 8)

Input Wire L/Black

Input Wire N/White

Ground Wire /

Yellow & Green Wire

Remote Control Wiring Diagram

6 Raise up the canopy to the ceiling to cover the mounting bracket, making sure the canopy will

sit into the two screws on the mounting bracket. Then rotate the canopy to ensure the screw

heads are at the narrow end of the holes. (Fig. 9)

7 To attach fan blades, loosen and remove the six screws on the motor and set aside. Align the

two holes on the blade with the holes on the motor and secure the blade with two screws.

Repeat for the remaining blades. (Fig. 10)

8 Secure the lower cover to the thread at the bottom of the fan by twisting the nut clockwise

until firmly tight. (Fig.11)

Fig u re 9

Ground Wire /

Yellow & Green Wire

Red Wire

Brown Wire

Grey Wire

Remote Control Receiver

Signal Reception Line

Remote Control Receiver

Fig u re 7

Fan Body

Fan Blade

Screws

Figu re 1 0

Figure 8