Amphony 1000 자주 묻는 질문 - 페이지 2

{카테고리_이름} Amphony 1000에 대한 자주 묻는 질문을 온라인으로 검색하거나 PDF를 다운로드하세요. Amphony 1000 4 페이지. 2.4 ghz digital wireless headphones
Amphony 1000에 대해서도 마찬가지입니다: 기능 비교 (1 페이지), 제품 정보 (4 페이지), 사용자 및 설치 설명서 (8 페이지)

페이지 인쇄

Q: What is Forward Error Correction and why is it used in these headphones ?

A: Occasionally, there may be some data which is corrupted during transmission. This may be the

case when there is interference, such as other transmitters, electrical sparks or if you move around

and the signal is temporarily lost. Forward Error Correction as it is used in our headphones can in

most cases repair the data which is received to guarantee 100% correct data reception and

therefore 100% correct audio reception.

This technology is in part responsible for the high robustness of the transmission. With 900 Mhz

analog headphones you may have noticed 'clicks' or 'pops' during sparks which often occur when

switching on appliances.

Q: What exactly is a RangeBooster transmitter ?

A: A RangeBooster transmitter is a secondary transmitter which can be used to extend the opera-

ting range of the 2.4 GHz Digital wireless headphones. This is useful if you want to listen to your

headphones in areas where the signal may be blocked by walls or other obstacles. Also, the use of

RangeBooster transmitters is recommended in areas where there may be strong interference from

other transmitters, microwave ovens etc.

Please do not use a 5.8 GHz RangeBooster since it will

not work with your 2.4 GHz headphones.

The RangeBooster transmitter can be placed in an area where signal reception from the main

transmitter is not possible or difficult. It is possible to use multiple RangeBooster transmitters. It is

necessary though to have a cable connection, preferably a coaxial cable connection, between the

location of the main transmitter and any RangeBooster transmitter. The audio will be transmitted

from the main transmitter to any RangeBooster transmitter via cable digitally, i.e. without any audio

degradation.

Please do not use a 5.8 GHz RangeBooster since it will not work with your 2.4 GHz

headphones.

Q: What are the benefits of transmitting the full data rate without using audio compression ?

A: Since our transmitter transmits a data rate of over 3 Mbps (3 million bits per second), the audio

can be transmitted without audio compression. Also, forward error correction can be used. The

reason that other systems use audio compression is to reduce the extremely high data rate of a

pure (uncompressed) audio signal in order to either be able to store that signal or transmit that

signal more easily.

The biggest drawback of using audio compression is that the quality of the audio signal is reduced,

such as in MP3-compressed audio. This is because audio compression removes parts of the music.

Some types of music which are particularly difficult to compress without noticing audio degradation.

Systems using audio compression are not able to deliver CD-quality audio.

Forward error correction adds additional data to the transmitted signal so that in cases where the

data may be corrupted during transmission, the original data can be recovered at the receiver. This

ensures a very robust transmission.