Amphony 2000 문제 해결 매뉴얼

{카테고리_이름} Amphony 2000에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Amphony 2000 5 페이지. 2.4 ghz digital wireless headphones
Amphony 2000에 대해서도 마찬가지입니다: 사용자 및 설치 설명서 (13 페이지), 기능 비교 (1 페이지), 자주 묻는 질문 (5 페이지), 제품 정보 (4 페이지)

페이지 인쇄

R R

Troubleshooting Guide

2.4 GHz DIGITAL Wireless Headphones, Model 2000

Below are some common problems and their solutions for your product. If your problem is not

among those problems mentioned below then please contact your dealer for further assistance.

A) Problems during installation

Problem 1: Audio device doesn't have a digital or RCA type line output.

What to do: The transmitter analog audio interface can also be connected to headphone type

outputs (3.5 mm or 6.3 mm type outputs) by using a 3.5 mm-to-RCA or 6.3 mm-to-RCA adapter.

Please contact your dealer for such an adapter. Usually such outputs have a volume control that

can be used to adjust the audio output level.

Problem 2: Battery lid at headphones doesn't open.

What to do: Press the very outside edge of the battery lid firmly into the capsule as illustrated in the

manual. The battery lid will flip open.

B) Problems during operation

Problem 3: None of the interface indicator lights light when power is

applied to the transmitter.

1st possible cause: Faulty power outlet.

What to do: Check the power outlet using another appliance or a voltage tester.

2nd possible cause: Faulty AC adapter.

What to do: If possible, check the voltage of the supplied AC adapter. Otherwise contact your

dealer.

December 2002