Amphony 1550 사용자 및 설치 설명서 - 페이지 3

{카테고리_이름} Amphony 1550에 대한 사용자 및 설치 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amphony 1550 13 페이지. 5.8 ghz digital wireless audio transmitter/amplifier
Amphony 1550에 대해서도 마찬가지입니다: 자주 묻는 질문 (5 페이지), 기술 사양 (2 페이지), 기능 비교 (1 페이지), 사양 (4 페이지), 사양 (4 페이지), 사용자 및 설치 설명서 (12 페이지), 제품 정보 (4 페이지), 사용 및 설치 매뉴얼 (6 페이지)

페이지 인쇄

User and Installation Guide

Unpacking: Check that this package contains:

One 5.8 GHz Digital Audio transmitter - Model 1550, two 5.8 GHz Digital Audio

amplifiers - Model 1550, one small and two large AC adapters (wallwarts), four

short speaker cables, one RCA audio cable.

Connecting the transmitter

The transmitter connects either to a standard line-out audio interface via the

supplied RCA cable or to an amplified speaker output via the supplied short

speaker cables.

If the transmitter is connected via speaker cables, observe the polarity of the

cable connection to ensure that the transmitter will be fed with a correct

polarity signal. If one of the cables is switched (reversed), one speaker will

receive an opposite polarity signal which will degrade sound performance.

The transmitter can also be connected to other audio outputs by using an

appropriate adapter.

Connect the supplied small AC adapter's barrel-shaped plug into the DC 9V

jack, and then plug the transformer into a standard AC outlet. We recommend

the use of a surge protector to protect the transmitter

ATTENTION!

Do not use both the speaker cables and RCA cable. Do not connect

speakers to the transmitter. Do not connect the large AC adapter to

the transmitter.

The information contained herein is subject to change without notice.

Revisions may be issued to advise of such changes and/or additions.

All product names, trade names, or corporate names mentioned in this

document are acknowledged to be the proprietary property of the registered

owners.

FCC ID PMJT1500

This device complies with part 15 of the FCC Rules. Operation is subjected

to the following two conditions: 1) This device may not cause harmful

interference and 2) this device must accept any interference received,

including interference that may cause undesired operation.

Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate the

equipment.

from power surges.