Amphony 1550 사용자 및 설치 설명서 - 페이지 2
{카테고리_이름} Amphony 1550에 대한 사용자 및 설치 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amphony 1550 12 페이지. 5.8 ghz digital wireless audio transmitter/amplifier
Amphony 1550에 대해서도 마찬가지입니다: 자주 묻는 질문 (5 페이지), 기술 사양 (2 페이지), 기능 비교 (1 페이지), 사양 (4 페이지), 사양 (4 페이지), 제품 정보 (4 페이지), 사용자 및 설치 설명서 (13 페이지), 사용 및 설치 매뉴얼 (6 페이지)
페이지 인쇄
User and Installation Guide
Unpacking: Check that this package contains:
One 5.8 GHz Digital Audio transmitter - Model 1550, two 5.8 GHz Digital
Audio amplifiers - Model 1550, one small and two large AC adapters
(wallwarts), four short speaker cables, one RCA audio cable.
Step 1
Step 1
Connecting the transmitter
The transmitter connects either to a standard line-out audio interface via the
supplied RCA cable or to an amplified speaker output via the supplied short
speaker cables.
If the transmitter is connected via speaker cables, observe the polarity of the
cable connection to ensure that the transmitter will be fed with a correct
polarity signal. If one of the cables is switched (reversed), one speaker will
receive an opposite polarity signal which will degrade sound performance.
The transmitter can also be connected to other audio outputs by using an
appropriate adapter.
Connect the supplied small AC adapter's barrel-shaped plug into the DC 9V
jack, and then plug the transformer into a standard AC outlet. We recommend
the use of a surge protector to protect the transmitter from power surges.
ATTENTION!
Do not use both the speaker cables and RCA cable. Do not connect
speakers to the transmitter. Do not connect the large AC adapter to
the transmitter.
Copyright (C) 2004 Amphony. All rights reserved.
The information contained herein is subject to change without notice.
Revisions may be issued to advise of such changes and/or additions.
All product names, trade names, or corporate names mentioned in this
document are acknowledged to be the proprietary property of the registered
owners.
FCC ID PMJT1500
This device complies with part 15 of the FCC Rules. Operation is subjected
to the following two conditions: 1) This device may not cause harmful
interference and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Page 1
R R