Amphony 1500 사용자 및 설치 설명서 - 페이지 5

{카테고리_이름} Amphony 1500에 대한 사용자 및 설치 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amphony 1500 8 페이지. 5.8 ghz digital wireless audio transmitter / receiver
Amphony 1500에 대해서도 마찬가지입니다: 기술 사양 (2 페이지), 사용자 및 설치 설명서 (17 페이지), 제품 정보 (4 페이지), 사양 (4 페이지), 사용자 및 설치 설명서 (9 페이지)

페이지 인쇄
Amphony 1500 사용자 및 설치 설명서
User and Installation Guide
Step 4
Operating the transmitter and receiver
After powering up the transmitter, the transmit light will light for approximately
5 seconds while the transmitter initializes.
After initialization, the transmit light will go out.
Once audio is detected at the audio input, the transmit light will light and the
transmitter will transmit the audio signal.
When no audio is present anymore, the transmitter will go into standby mode
after approximately 1 minute. The transmit light will go out. During standby
mode, no signal is transmitted.
Once the receiver is powered up and a valid audio signal is detected, audio
will be output at the receiver line out. When no valid audio signal is received,
the receiver audio output will be muted and the receiver will go into standby
mode.
If the transmitter or receiver are not used for an extended period of time,
remove the AC adapters from the power outlet.
Transmit light
R R
5.8 GHz Digital Audio Transmitter
5.8 GHz Digital Audio Transmitter
R R
Page 4