Dovre 700 설치 지침 및 운영 매뉴얼 - 페이지 7

{카테고리_이름} Dovre 700에 대한 설치 지침 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dovre 700 14 페이지.

3.3.

Finishing

When the stove is placed in the final position and hermetically connected to the

chimney, you can replace all of the loose parts.

Your stove is now ready for use.

Attention: never light a fire with the inner plates or refractory stones re-

moved.

3.4.

Packaging materials should be disposed of in a responsible way and in accor-

dance with governmental regulations.

4.1.

The only suitable fuels for this stove are wood, brown coal briquettes. No other fuels

are allowed to be burnt, as they can inflict serious damage to your stove.

Do not burn any treated wood either, such as scrap wood, dyed wood, impregnated

or preserved wood, plywood or chipboard. The fumes of these, as of synthetic mate-

rials, old papers and household waste, are highly polluting for both your stove and

your chimney, and for the environment. They also could cause chimney fires.

Wood

Hard woods, such as oak, birch- and fruit-trees, are the ideal fuels for your stove.

The wood must have dried for at least two years in a covered and well-ventilated

place. Split logs will dry faster. Dry wood should contain no more than twenty pe r-

cent moisture.

Wet logs are unsuitable for burning, as they do not produce enough heat and all of

the energy is lost in the process of evaporation. Moreover, the burning of wet wood

causes badly smelling gases to be released and a thick layer of tar will deposit on

the stove panels and in the chimney.

Brown coal briquettes

Brown coal briquettes burn in more or less the same way as wood does. You should

only burn briquettes on a bed of charcoal in your stove.

4.2.

In order to create sufficient draught and to prevent smoke from being emitted into

the room, the chimney should be warm enough before lighting a fire. A cold chim -

700

03.27838.100