Combi Flare 사용 설명서 - 페이지 3

{카테고리_이름} Combi Flare에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Combi Flare 11 페이지.
Combi Flare에 대해서도 마찬가지입니다: 사용 설명서 (10 페이지)

Assembling the Stroller

1. Remove stroller and rear wheel assemblies

from the plastic bag.

2. Remove canopy by detaching rubber

bands.

3. Remove front wheel assemblies, guardrail

and stroller handle from inside the stroller.

4. Lift locking lever from stroller frame and

open stroller.

5. Grasp right and left steel tubes and snap

the stroller away from you to open.

6. Insert stroller handle into frame by pressing

chrome buttons into the back of the stroller

frame. Push handle down until the chrome

buttons lock into both sides of the handle.

7. While lifting up on gray tube (figure A),

attach long gray tabs from handle to the

round gray tabs on each side of stroller.

8. Secure the handle by lifting the folding

levers on each side of stroller until the

gray tabs lock into position.

Attaching & Removing the Front Swivel Wheels

1. Turn stroller over and remove

packaging material from stroller

frame.

2. Insert the front wheels onto

the stroller leg. Make sure the

swivel wheel lever is behind the

stroller leg and released. You

will hear a click when the wheel

is properly attached.

- 3 -

Swivel lever MUST be locked before folding

and storing stroller to avoid damage.

Removing the Swivel Wheels

Press in the square button located at the

bottom of the wheel holder while pulling

the assembly off of the swivel shaft.

Release Button

(ﬁgure A)