Follett 25HI425A 설치 매뉴얼 - 페이지 7

{카테고리_이름} Follett 25HI425A에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett 25HI425A 17 페이지. Ice and water dispensers

Installing wall mount dispensers

WARNING!

§ Wall mount dispensers are intended to be mounted

above a sink, eliminating the need for a drain pan.

§ Before beginning installation verify that the sink size

and location meet the requirements shown in Fig. 6.

§ If requirements are not met, a drain pan must be

used to prevent ice and water from falling on counter

or floor.

§ FAILURE TO TAKE THESE PRECAUTIONS

COULD RESULT IN SLIPS AND FALLS ON WET

FLOORS

Fig. 6 – Minimum sink requirements (without drain

pan), front view

Front View

Sink centered

below chutes

21.50"

(54.7 cm)

14.25"

(36.2 cm) min.

Fig. 7 – Minimum sink requirements (without drain

pan), side view

SIDE VIEW

24.36" (61.9 cm)

17.01"

(43.2 cm)

18.92"

(48.1 cm)

30.00" (76.2 cm)

MIN DISTANCE TO SINK FRONT

25CI425A/W, 25HI425A, 50CI425A/W, 50HI425A

Front View

Sink centered

below dispenser

21.50"

(54.7 cm)

23.00"

(58.5 cm) min.

25HI425

35.88" (91.1 cm)

50HI425

39.88" (101.3 cm)

18.00" (45.7 cm)

SUGGESTED POWER

CORD ROUTING