Dovre 500e 설치 및 운영 매뉴얼 - 페이지 4

{카테고리_이름} Dovre 500e에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dovre 500e 5 페이지. Electric cast iron stove

페이지 인쇄

Thermostat Operation

The thermostat controls the heat output according to

the room temperature. This ensures that the appliance

will not produce heat unnecessarily when the room is

warm.

To set the temperature you require, turn the

thermostat knob fully clockwise to max position.

When the room is warm enough, turn the knob back

slowly until the thermostat just clicks off. The

appliance

will

now

maintain

your

selected

temperature.

Note: Once the thermostat has switched the appliance OFF

it may take some time before the appliance comes back on.

This does not mean that the appliance is faulty.

Thermal Safety Cut-out

A thermal safety cut-out is incorporated in the

appliance to prevent damage due to overheating.

This can happen if the heat outlet is restricted in any

way. The appliance will switch on once the

obstruction has been removed and the appliance has

cooled. If the cut-out continues to operate

intermittently, the appliance should be switched off

and a service agent contacted.

WARNING: ALWAYS DISCONNECT

FROM THE POWER SUPPLY BEFORE

ATTEMPTING ANY MAINTENANCE.

5. LAMP REPLACEMENT

5. Lamp replacement

The Coal Effect lamps can be replaced by removing

the 2 self tapping screws located at the front of the

effect (see fig 4). The screws can be accessed by

removing 2 plastic stoppers situated between the glass

door and the lower door (page 3 fig 1) and inserting a

small Pozidrive screwdriver through the front casting

locating the self tapping screws.

Lift the fuel effect up lightly to clear the ledge at the

base of the glass viewing screen, tilt one end up first

and then lift the fuel effect out of the appliance casing.

fig 4

fig 5

Carefully rotate the lamp anti-clockwise until it comes

out of its holder (see fig 5)

Replace the defective lamp with a 240V, 40 watt E14

SES clear candle lamp, rotating the lamp clockwise in

the holder until it is fully home. Do not over-tighten.

Refit the fuel effect complete with fixing plugs,

ensuring that the rear edge locates on the ledge at the

base of the glass viewing screen, then refit the coals

(see page 3).

6. Maintenance

6. MAINTENANCE

6.1. CLEANING

Before commencing cleaning, unplug the appliance

and allow it to cool.

The surface of the appliance should be given an

occasional wipe over with a soft brush. A number of

suitable cast iron stove polishes are available from your

Dovre Dealer.

The glass screen should be cleaned carefully with a

chamois leather DO NOT use proprietary glass

cleaners.

To remove the accumulation of dust or f luff the soft

brush attachment of a vacuum cleaner should

occasionally be used to clean the outlet grille of the fan

appliance located under the stove (see page 3 fig 1).

To clean the fuel effect, remove and wash the coal

pieces in warm water. The plastic tray should be

wiped clean with a damp cloth. When dry replace the

coal pieces and arrange as previously described for best

effect.

7. After Sales Service

7. AFTER SALES SERVICE

Your product is guaranteed for one year from date of

purchase. We undertake to exchange or repair free of

charge within this period, any part (excluding lamps)

found to be defective due to a manufacturing fault.

Should you require after sales service, please get in

touch with your Dovre Dealer.

Please do not initially return a faulty appliance or part

of an appliance to us as this may result in transit

damage and/or delay in providing service. Let your

Dovre Dealer know your difficulty, quoting the model

number and series letter of the appliance. We will

then take the appropriate action.

8. Spare parts

8. SPARE PARTS

Spare parts are available from your Dovre Dealer.

When ordering spare parts, specify the type and

Serial number of the appliance.

9. 1 YEAR WARRANTY

If the appliance should prove to be defective within

one year of the purchase date, the unit will be repaired

free of charge, subject to the following conditions.

1. The purchaser shall complete the registration

section below and return it within seven days of the

purchase. Failure to return the registration could result

in delays processing claims.

2. The appliance shall have been installed in

compliance with the installation instructions.

3. This warranty does not cover site visits and labour

charges.

This warranty does not affect the statutory rights of

the consumer

Please complete and return this section within seven

days of purchase to:

Dovre Castings Ltd, Weston Works, Weston Lane,

Tyseley, Birmingham B11 3RP.

NAME:

ADDRESS:

TELEPHONE:

MODEL:

DATE OF PURCHASE: