Combi Tetra TS 6700 사용 설명서 - 페이지 7

{카테고리_이름} Combi Tetra TS 6700에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Combi Tetra TS 6700 13 페이지.

페이지 인쇄

Folding the Stroller

1. Raise the backrest to the upright position.

2. Lock both front swivel wheels. Make sure the

footrest is down.

3. Fold the canopy by lifting the canopy levers.

4. Make sure the infant car seat attachment

straps are tucked behind the seat cushion.

Manual

Folding

Latch

Removing/Attaching the Seat Cushion

Removing

1. Unbuckle the 5-point harness and pull all the straps through the

seat cushion.

2. Grasp the seat cushion at the top and unfasten from the velcro.

Attaching

1. Pass the 5-point harness straps through the appropriate locations in

the seat cushion.

2. Fasten the velcro.

- 7 -

COMBI International Corporation • 189-199 Easy St. • Carol Stream, IL 60188 • www.combi-intl.com

Customer Service 1-800-992-6624 • 10:00 a.m. - 5:00 p.m. Central Standard Time • Monday - Friday

CAUTION

Before folding, remove all items from the basket and store the safety

cover under the seat cushion.

5. Pull up and hold the folding levers while tilting the stroller

backward until it starts to fold.

6. Grasp the armrest and handle in opposite hands and pull

together.

7. Engage the manual folding latch on the side of the stroller.

8. (1) Raise the footrest.

(2) Rotate the handle to fold

position.

Note:

The stroller is self-standing.

The plastic piece located on

the basket rim is provided to

support the stroller.

Folding Levers are located below

the handle adjuster buttons on each

side of the handle.

(1)

CAUTION

If seat cushion is ripped or torn,

do not use.

Do not use the stroller without

the seat cushion.

(2)