Ampler Curt 2020 매뉴얼 - 페이지 4

{카테고리_이름} Ampler Curt 2020에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ampler Curt 2020 18 페이지.

You will need

Adjust the handlebar

V2.3 03.11.20

Assembly

• 4 mm hex key

• 6 mm hex key

• Pedals

1. Take the 4 mm hex key and loosen the side bolts of the stem. Turn

the handlebar to the riding position. Make sure the handlebar is

aligned with the front wheel.

2. Take the 4 mm hex key and lightly tighten the top cap bolt on the

handlebar stem. This will make sure the headset will not have any

play in it.

90°

3. Take the 4 mm hex key and carefully tighten the same stem bolts

you loosened 2 steps back.

Turn your handlebar left and right and make sure it spins freely. If

it feels a bit too tight, loosen the stem bolts and just slightly

loosen the top cap.