Follett HCC1010WHT 매뉴얼 - 페이지 5

{카테고리_이름} Follett HCC1010WHT에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett HCC1010WHT 8 페이지. Self-contained chewblet ice machine
Follett HCC1010WHT에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지)

페이지 인쇄

3 – Undercounter/in-cabinet mounting and ventilation

Using Follett supplied grilles

Horizon Elite ice machines can be installed undercounter/in‑cabinet to fill bins or dispensers using RIDE technology. Care must be

taken to ensure proper cabinet venting to avoid recirculation of hot air. Improper venting can cause ice machine outages.

Supplied

grilles

exhaust

cabinet door

supplied intake grille

Important specifier notes for using Follett supplied grilles

1. The supplied exhaust grille must be located at least 18.00" (45.7 cm) from the

supplied air intake grille (exhaust air must not recirculate with intake air).

2. Cabinet interior must be open to allow for unrestricted exhaust air flow.

3. Ice transport tube needs minimum 1/4" per foot (2 cm per meter) pitch toward

ice machine and should be secured to prevent dips and traps from forming.

Self-contained 1010, 1410 series ice machine

Horizon Elite

ice machine

18.00" (45.7 cm)

minimum

25.25" (64.1) cm)

23.50"

(59.69 cm)

Cabinet door

air in

minimum

must mate directly

to air intake gasket

air intake gasket

door & gasket

must mate

directly

locating

cutout

2.00"

(5.08 cm)

cutout for supplied air intake grille

24.00"W x 16.00"H (61.0 cm x 40.6 cm)

minimum

electric

water

drain

12.00" (30.5 cm) minimum

between ice machine

and dispenser

Horizon Elite ice machine

2.25" (5.72 cm)

cutout

bottom of ice machine

side of ice machine

4. Cabinet door must mate directly to air intake gasket.

5. Cabinet interior must provide a minimum clear space of 23.50" (59.7 cm) high

by 25.25" (64.1 cm) deep.

6. Cutout for supplied grilles must meet minimum size requirements

shown above.

7. Utilities should be conveniently located as shown.

Ice transport tube

minimum 1/4" per foot

(2 cm per meter)

pitch toward ice machine

secure to prevent dips

and traps from forming

see dispenser

speciﬁcation

sheet for

installation

requirements

Completed installation with

gasket and door in place –

Side view

25.25" (64.1 cm) min.

Front

23.50"

(59.7 cm)

minimum

Form# 7030