Ampler Stellar 사용자 설명서 - 페이지 7

{카테고리_이름} Ampler Stellar에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ampler Stellar 17 페이지. 2017
Ampler Stellar에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

Turning the bike on

Charging the bike

State of charge

Turning the lights on

V2.0 04.06.20

Power on the bike

Just press the power button on the power panel, located on the left

side of the bike. The bike is already fully charged when you receive it.

bike is OFF

1x short press

Charging the bike is like charging a laptop. Just connect the bike with

a standard wall power outlet (110–240 V AC) and hook the magnetic

charger plug to the charging socket located on the power panel and

let it to charge.

Once the led on the charger turns from red to green

it has been fully charged. It takes about 2.5 hours from drain to full.

Ampler charger will automatically stop charging when the battery is

full. There is no risk of overcharging the battery when you forget to

unplug it.

For your protection, please read carefully "Charger safety manual"

chapter below before operating the Ampler battery charger.

The power button also acts as a battery charge monitor. The led

colours according to the state of charge.

100–75%

74–50%

To turn the lights ON and OFF, hold the power button for 1–2 seconds.

You can turn the lights on/off also from your Ampler mobile app.

The bike will remember the last setting, so the lights will be ON when

you leave them on next time you power the bike.

bike is ON

press + hold

bike is ON

49–10%

9–0%

front + rear lights

release

switch ON/OFF