Dowco 20166-99 설치 지침 - 페이지 2

{카테고리_이름} Dowco 20166-99에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dowco 20166-99 2 페이지. 2012-18 bimini top mako pro 17 skiff cc

페이지 인쇄

BUTTON LOCATION AND MOUNTING

STEP 1

Install the deck buttons and eye straps on top of the gunwale. Starting at the center of aft cleat, measure forward 44 1/2" for the main frame

button location. Then measure 36 1/2" back for the hold down arm button location. Measure 40" foward for the eye strap.

STEP 2

Center buttons at each mark - use center punch to mark.

STEP 3

Use a 1/4" drill to install the main frame deck button and the hold down arm button (Detail A). Use a 5/32" drill for the eye strap. Do not ever

size the holes for the eye strap.

STEP 4

Install the frame on the buttons. Two people may be required to prevent damage to the boat.

STEP 5

Attach the web straps to the front of the frame per Figure 2 and secure to the straps to the eye straps installed on the gunwale.

NOTE:

Extra care should be taken when drilling into the fiberglass gunwale. After the holes are drilled, take a phillips head screwdriver and lightly chamfer the

outer edge of the hole. Failure to chamfer the holes will result in cracking and chipping of the fiberglass finish.

FIG. 1

STOWING THE TOP

This frame can only be stored in an aft radar arch position. It is not recommended to store the frame and top in a fully down position.

CAUTION:

Do not stow top while wet.

Dowco Marine, Inc. | 1610 Frisco Road, Lebanon MO 65536 | dowcomarine.com | (800) 404-5252

WRAP AROUND FRAME

WARNING:

Do not trailer boat with top in radar arch position.

AND TIGHTEN

140322-00 | 02/19