Dowco FISHINI 설치 매뉴얼 - 페이지 2

{카테고리_이름} Dowco FISHINI에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dowco FISHINI 7 페이지. Bimini top

DETERMINING MOUNTING LOCATION

The fishini is intended to be mounted on the inside of the gunnel. This will allow you to fold the frame up and rest it on the aft platform in front of the

motor. You will be using your markable tape, marker, and tape measure for this step.

STEP 1

Apply strips of tape to inside mounting surface of gunnel. Be generous and use multiple rows of tape.

STEP 2

Determine preferred coverage area. It is important to determine the desired location of the fishini prior to drilling into your boat. The fishini

offers 54" of coverage area. The main bow mounting point is approximately 47" aft of the desired location of the forward bow crown.

MAIN BOW MOUNTING POINT

STEP 3

Mark deck button location on tape. The location will be 47" aft of forward bow crown (as shown above) and 1" below top of gunnel. The 1"

measurement may vary. The deck button should be mounted on a flat surface.

STEP 4

After the desired coverage area is established, it is important to fold the frame and rest it on the back platform of the boat to make sure it

does not interfere with the motor. The crown of the frame is 68-1/2" from the main bow mounting point.

MOTOR

FRAME CROWN

68.5 INCHES

54 INCHES

47 INCHES

MAIN BOW MOUNTING POINT

FORWARD BOW CROWN

142780-00 | 03/18