COMBISAFE 0208-012 사용자 지침 - 페이지 3

{카테고리_이름} COMBISAFE 0208-012에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. COMBISAFE 0208-012 4 페이지. Barrier box

페이지 인쇄
COMBISAFE 0208-012 사용자 지침
Don’t stack
beyond this
point
800 mm
1130 mm
COMBISAFE
1
Stacking barriers in the box
It’s importent to stack the barriers correctly in the
box. Otherwise the barrier stack will become too
high and unstable.
2
Place every second barrier in opposite direction, i.e
every second barrier with the toebord upwards.
1
Make sure that the barriers are placed centered in
2
the box to avoid overturning.
1
Don’t stack barriers above the beam.
2
The barriers weigh 19,5 kg and can be handled by
one person, but it is recommended for frequent
loading and unloading to be carried out by two
persons or to use lifting equipment. Don’t move or
lift the box by hand.
Refer to current Health and safety regulations
applicable to country of use to ensure compliance.
Safety precaution
Before every use
Always check the Barrier Boxes for any signs of
damage or visible deformation.
Don’t use boxes that don’t pass checks according
to the following checklist:
Checklist
- Crack free and notch-free welds
- Deformation
- Corrosion
- Damage
- Wearing
- Visible Combisafe label and ID number
- Deformed or damaged lifting eyes
1142 mm
- No sharp edges
If in doubt, consult Combisafe!
Annual Inspection
It is recommended that the box is inspected at least
once a year by a trained competent person unless
stated otherwise in a community country of use.
®