Acer VS480G-UQ8300C 사용자 설명서 - 페이지 21
{카테고리_이름} Acer VS480G-UQ8300C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Acer VS480G-UQ8300C 39 페이지. Veriton series
페이지 인쇄
Post-installation instructions
Observe the following after installing a computer component:
1
See to it that the components are installed according to the step-
by-step instructions in their respective sections.
2
Replace any expansion boards or peripherals that you removed
earlier.
3
Replace the side panels.
4
Connect the necessary cables and turn on your computer.
Opening your computer
Caution: Before you proceed, make sure that you have turned off
your computer and all peripherals connected to it. Read the
"Preinstallation instructions" on page 10.
You need to open your computer before you can install additional
components. See the following section for instructions.
To remove the computer cover
1
Turn off your computer and unplug all cables.
2
Place your computer on a flat, steady surface. If your computer is
in the vertical position, remove the foot stands and place your
computer in the regular desktop position.
3
Turn the screws counterclockwise to release the cover.
4
Hold the sides of the cover with both hands.
5
Slide it back about an inch and then gently lift it upward to detach
it.
To replace the computer cover
1
Align the cover's hinges to the housing frame; then gently push it
in to slide it back into place.
2
Secure the cover with the screws.
Upgrading your computer
11