Follett Horizon Elite Chewblet HCD1010NMS 매뉴얼 - 페이지 6
{카테고리_이름} Follett Horizon Elite Chewblet HCD1010NMS에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett Horizon Elite Chewblet HCD1010NMS 8 페이지. Ice machine with ride technology installation instructions for ice manager diverter valve
Follett Horizon Elite Chewblet HCD1010NMS에 대해서도 마찬가지입니다: 매뉴얼 (8 페이지), 설치 지침 매뉴얼 (17 페이지), 설치 지침 매뉴얼 (16 페이지)
페이지 인쇄
2 – Undercounter/in-cabinet mounting
Cabinet details
Important specifier notes
1. Cabinet door opening must meet
minimum size requirements shown
and be free of obstructions to allow
ice machine to slide out (no lip or
utilities to block removal).
2. Cabinet base must be capable
of supporting ice machine and
allow ice machine to rest flat on
cabinet bottom.
3. No counter supports, electric or
plumbing can run in front of the
ice machine.
3 – Horizon Elite ice machine mounting accessories
Optional wall mount bracket
23.00"
(58.4 cm)
6
Form# 7035
Ice transport tube
Cabinet door opening
24.00"W x 23.5"H
(60.9 cm x 59.7 cm) minimum
Optional machine stand
22.00"
(55.9 cm)
B
25.50"
(64.8 cm)
A - 15.875" (40.3 cm)
B - 19.375" (49.2 cm)
minimum 1/4" per foot
(2 cm per meter)
pitch toward ice machine
secure to prevent dips
and traps from forming
slides
out
Cabinet base
must be flat and free of obstructions
(no lip or utilities to block removal)
6.88"
(17.5 cm)
A
C
D
C - 13.00" (33.0 cm)
D - 21.00" (53.3 cm)
Remote 1010, 1410 series ice machine
12.00" (30.5 cm) minimum
between ice machine
and dispenser
Important specifier notes
1. For secure wall mounting, specify optional
wall mount bracket.
2. Wall and fasteners must support the weight
of the ice machine, bracket, supply water and
ice. Use of a backing board may be required
with hollow wall construction.
3. Machine stand mounting adds 6.88"
(17.5 cm) to height of ice machine.
4. No dips in tube routing allowed.
5. Ice transport tube needs minimum 1/4"
per foot (2 cm per meter) pitch toward ice
machine and should be secured to prevent
dips and traps from forming.