Follett Horizon Elite Chewblet HCD1010RMS 설치 지침 매뉴얼 - 페이지 10
{카테고리_이름} Follett Horizon Elite Chewblet HCD1010RMS에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Follett Horizon Elite Chewblet HCD1010RMS 17 페이지. Ice machine with ride technology installation instructions for ice manager diverter valve
Follett Horizon Elite Chewblet HCD1010RMS에 대해서도 마찬가지입니다: 매뉴얼 (8 페이지), 매뉴얼 (8 페이지), 설치 지침 매뉴얼 (16 페이지)
페이지 인쇄
Connect docking assembly to ice machine.
6.1
Ice transport tube installation
➋
• Slide ice machine into docking assembly
ensuring that drain tube is fully seated on
barbed drain fitting
• Insert ice transport tube all the way into
coupling and tighten nut firmly
6.3
Refrigeration lines
➊
• Evacuate line set.
• Connect self-sealing liquid and suction
line fittings
➊
10
➊
➊
➋
Internal connections
6.2
Water solenoid, shut-off valve,
and potable water line options
If water solenoid is already mounted to
evaporator:
• Insert potable water line into shut-off valve.
If this is an undercounter installation:
• Mount water solenoid atop evaporator and
locate the shut-off valve inside the machine.
Insert potable water line into shut-off valve.
If water solenoid is not mounted and
machine will not be installed under-
counter:
• Mount water solenoid to inside rear (upper
right corner) of docking assembly using one
screw.
• Insert potable water line into shut-off valve -
locate the shut-off valve outside the machine.
•
Insert outgoing line from shut-off valve into
push-in connection of water solenoid.
6.4
Power cord
• Remove twist tie
• Carefully pass cord through opening and
plug into wall outlet
remote condensing
6
ICE MANAGER